Keruing Timber Cut to Size

If you need Keruing timber cut to size, then make sure you order from Timbersource. Not only is each piece sourced in compliance with The EU Timber Regulation (EUTR), our cutting calculator allows you to ensure that each is exactly made to measure. All you need to do is enter the desired machining method and dimensions, and we’ll take care of the rest in our private mill and machining shop.

Keruing timber cut to size by our high grade equipment will be delivered to you as quickly as possible, without any need for further work before you start putting it to work yourself.

The Benefits of Keruing Timber

Keruing refers to over 70 similar species of wood which are native to South-East Asia, and which vary in both density and weight. The texture of each one is relatively coarse, and Keruing timber often shows shallow, interlocking grain. Silver-grey in colour, the wood itself is rarely seen since the benefits of Keruing timber make it perfect for use in lorry floors or wharf decking. We mainly stock Keruing in either 50mm x 150mm sawn and 28mm x 145mm profiled half-lap vehicle flooring, though limited quantities of other sizes are sometimes available.

The benefits of Keruing timber derive mainly from its strength. It is moderately resistant to shock, and moderately durable. While it is non-resistant to some termite breeds, it requires little maintenance, is very hard wearing, and ideal for both outdoor furniture and construction.


What is Keruing?

Keruing timber comprises 70 similar species (from various areas in Malaysia/Sarawak/Sabah/Indonesia) which have variations of density and weight. For example it can vary from 640 - 960 kg/m3. Texture is moderately coarse and may have shallow interlocking grain. The colouring is not an issue as it is used for exterior constructions and will weather to silver-grey. Sizes we mainly stock are 50mm x 150mm sawn and 28mm x 145mm profiled Half-lap vehicle flooring, although some other sizes are available in limited quantities.

Latin name Dipterocarpus spp, Dipterocarpus cornutus, Dipterocarpus costulatus, Dipterocarpus crinitus, Dipterocarpus sublamellatus, Dipterocarpus apterus, Dipterocarpus lowii, Dipterocarpus verrucosus, Dipterocarpus gracilis, Dipterocarpus acutangulus, Dipterocarpus grandiflorus, Dipterocarpus warburgii

Also known as apitong, Sabah gurjun, yang, Malaysian keruing, Indonesian keruing, Sarawak keruing, kruen

Keruing Introduction There are some thirty species of Dipterocarpus occurring in South East Asia. For practical purposes it has been considered best to give the description and properties of the timbers together, since the exporting countries do not differentiate between the species but sell them collectively. This may result in variations in colour, weight etc. Some of the more important commercial species are given below.
Dipterocarpus cornutus Dyer, D. costulatus V..SI, D. crinitus Dyer, D. sublamellatusFoxw. There may also be included, D. apterus, D. lowii, D. verrucosus, and others. These produce Malaysian keruing.
Dipterocarpus cornutus Dyer, and D. gracilis Bl. produce Indonesian keruing.
Dipterocarpus acutangulus Vesque, D. apterus Foxw., D. caudiferus Merr, D. lowiiHook f., and D. verrucosus Foxw ex V.SI. These produce Sarawak keruing.
Dipterocarpus acutangulus Vesque, D. caudiferus, D. confertus V.SI., D. gracilisBl.,D. grandiflorusBlanco, and D. warburgii Brandis. These produce Sabah keruing.

nvironmental Many species appear on the IUCN Red List of Threatened Species and are classified as: CR - Critically Endangered: at very high risk of extinction in the wild / EN - Endangered: at high risk of extinction in the wild

Distribution The trees of this genus occur gregariously throughout South East Asia, Burma, India, The Andamans, Sri Lanka, Thailand, South Vietnam, Cambodia and the Philippines.

Keruing Properties

The Tree The trees are evergreen and generally large, depending on locality, reaching heights of 25m to 45m and a diameter of 0.75m to 1.5m with a straight, cylindrical bole often clear of branches to 21 m above a small buttressed base.

The Timber The sapwood is greyish-brown and distinct, and usually 50mm to 75mm wide. The heartwood varies from light red to reddish-brown or brown, darkening on exposure. The grain is usually straight but may be shallowly interlocked, and the texture is moderately coarse or coarse, but even. The timber contains an oleo-resin which exudes in a number of pieces especially on the end grain. The various species vary in weight from 640 kg/m³ to 960 kg/m³ but an average for the group is about 740 kg/m³ when dried.

Drying The timbers of this group dry slowly, and it is difficult to achieve uniform drying particularly in thick stock or in quarter-sawn material. High temperatures aggravate the exudation of resin, and care is therefore needed in order to reduce this to a minimum and also to reduce the tendency for cupping to occur. There is high shrinkage during drying, and a corresponding high movement potential.

Keruing Strength Keruing generally compares with teak in most strength categories, but it is a little stiffer, and about 40 per cent more resistant to shock loads

Working Qualities Difficult - The variations that exist between the different species and within species in respect of resin content, type of grain and hardness, affect the general ease of working, dulling of cutters and finishing properties. The timbers vary from hard to very hard in cutting across the grain, and whereas straight grained material is capable of clean, slightly fibrous finish in planing and moulding, quarter-sawn, or interlocked-grained material picks up during these operations unless cutting angles are reduced to 20°. Contains silica which has a blunting effect on tools. The wood stains satisfactorily, but due to the resin, varnishing and polishing require a lot of care. It takes nails and screws reasonably well, but its gluing properties are variable. Normally sold air-dried. Some cupping may occur.

Durability Moderately durable. Non-resistant to some termites. Resistant to preservative-teatments.

Treatability Difficult

Moisture Movement Medium

Keruing Density (mean, Kg/m³) 740 (Density can vary by 20% or more)

Texture Medium

Availability Available at specialist timber merchant

Chemical Properties Liable to residue exudation

Physical Properties High crushing strength. Medium resistance to shock-loads. Exudes resin naturally in humid or warmer temperatures.


Working with Keruing

Keruing Use(s) Heavy structural use, Flooring. Lorry beds. Wharf decking.

Colour(s) Reddish brown (Also pinkish brown), Dark brown/black

Timbersource are a leading online hardwood timber merchant in the UK, supplying Keruing timber to the joinery, carpentry, construction and building trade at competitive prices. To Contact Us click HERE

mtr

Timbersource Ltd.

Quarry Way, Waterlip,
Shepton Mallet, Somerset,
United Kingdom
BA4 4RN